RFQ Checklist

To evaluate a custom stamping project accurately, send as much of the following as you have. Nothing here is compulsory — but each item you leave out is a question we have to answer by assumption, and an assumption in the quotation becomes a change order later. MOQ, tolerance and production timing are assessed per drawing, not from a standard table.

The six things that decide the price

Drawing details worth checking before you send

Most delays we see come from drawings that are complete enough to look finished but not complete enough to manufacture. Before sending, check that the drawing carries:

If a feature is not decided yet, mark it as open. An open item is easier to close before tooling than to discover at sample approval.

What happens after you send

  1. Drawing review. We check geometry, material, thickness, feature feasibility and finish, and list anything that needs clarification.
  2. Process and tooling route. Single-stage die, progressive die or press-brake bending, with the reason for the choice.
  3. Quotation. Unit price at the quantities you asked about, tooling cost, sample timing, production lead time and the inspection scope — in writing.
  4. Sample. Small-batch samples within 7 days of confirmed requirements, with a dimensional report against the marked features.
  5. Approval and production. Production runs in 15–25 days after sample approval, packed and documented as agreed.

Our confirmed capabilities

Evaluated per project, not published as a blanket figure

Tolerance, monthly capacity, regular production lead time and MOQ depend on the part drawing and requirements. We confirm them in the quotation instead of publishing figures that would not survive contact with your part. Monthly capacity is approximately 100 tons, subject to product mix.

Send your project

Email the drawing and the information above to robert@hmstamping.com, or send it on WhatsApp at +86 132 1096 8646. If you would rather use a form, the quote request page accepts attachments. Either route reaches the same review.

Metal stamping capabilities · Materials and finishing · Stamping FAQ

◌

LET’S TALK ABOUT YOUR PART

Request a quote

Share your drawing, material and quantity.

Request for quotation

    By submitting this form you agree to be contacted about your enquiry.

    Custom stamping parts made to drawingRequest a quoteWhatsApp
    Export support for customers in Malaysia, Vietnam and Thailand · See what to send for a quote