HARMONYOS · ABOUT

A stamping factory, run on drawings.

Harmonyos Metal Stamping has stamped brackets, plates and formed parts in Liaocheng, Shandong since 2011. ISO 9001 quality system, 30–400 T presses, 0.5–10 mm stock — quoted against your drawing revision, not from a catalogue.

AI illustration of a metal stamping workshopAI concept illustration: Multi-Axis Mounting BracketAI exploded-view concept of a precision mechanical assemblyAI concept of stamped components in an industrial robot application
AI illustration of a metal stamping workshop

A workshop built around other people’s drawings.

We do not sell a product range. Every part we make starts as someone else’s drawing — a bracket that has to fit an existing assembly, a plate that has to locate a sensor, a clip that has to hold a given load. The job is to make that drawing repeatably, at the quantity and price agreed.

That is why the first conversation is about the drawing, not the price. Revision, material grade, thickness, the dimensions that control fit and whether the part gets plated afterwards — those five answers decide the tool, the process and the quote.

Production runs on 30–400 T presses in 0.5–10 mm cold rolled steel, stainless, aluminium and copper alloys. First-off parts are sent for approval before the run, and the inspection records agreed with the quote travel with the shipment.

We export to buyers in Europe, North America and Asia. If you need company registration, ISO 9001 certificate or equipment lists for supplier approval, ask — they are provided as documents, not as claims on a web page.

Company milestones

How a part moves through the workshop — material in, parts out.

01

Material in

Coil or sheet arrives with its mill certificate. Grade and thickness are checked against the drawing before anything is cut.

AI flat-lay concept of disassembled mechanical components

Drawing first

The revision that controls the part decides everything else — tool, process, price.

AI concept of stamped components in an industrial robot application

One route per part

Stamping, bending or drawing is chosen for the geometry, not for what is convenient.

AI concept illustration: Multi-Axis Mounting Bracket

Records on request

Mill certificates and dimension reports are provided as documents, not as marketing claims.

A process for the requirement.

The checks belong next to the requirement.

Inspection scope is agreed with the quote. We state which dimensions get measured, how often, and in what format the results are recorded — so acceptance is a comparison against an agreed document, not an opinion at delivery.

Our quality system is ISO 9001. We do not claim IATF 16949, PPAP Level 3 or a published PPM figure, because we do not hold or publish them.

LET’S TALK ABOUT YOUR PROJECT

Send the drawing. We will answer with questions and a price.

Attach the STEP file and the dimensioned PDF, then state material, thickness, quantity, finish and delivery destination. Feasibility, price and lead time are confirmed after review.

Request for quotation

    By submitting this form you agree to be contacted about your enquiry.

    ◌

    LET’S TALK ABOUT YOUR PART

    Request a quote

    Share your drawing, material and quantity.

    Custom stamping parts made to drawingRequest a quoteWhatsApp
    Export support for customers in Malaysia, Vietnam and Thailand · See what to send for a quote